Synthesis of Gold-Platinum Core-Shell Nanoparticles Assembled on a Silica Template and Their Peroxidase Nanozyme Properties.

Bimetallic nanoparticles are important materials for synthesizing multifunctional nanozymes. A technique for preparing gold-platinum nanoparticles (NPs) on a silica core template (SiO2@Au@Pt) using seed-mediated growth is reported in this study. The SiO2@Au@Pt exhibits peroxidase-like nanozyme activity has several advantages over gold assembled silica core templates (SiO2@Au@Au), such as stability and catalytic performance. The maximum reaction velocity (Vmax) and the Michaelis-Menten constants (Km) were and 2.1 × 10-10 M-1∙s-1 and 417 µM, respectively. Factors affecting the peroxidase activity, including the quantity of NPs, solution pH, reaction time, and concentration of tetramethyl benzidine, are also investigated in this study. The optimization of SiO2@Au@Pt NPs for H2O2 detection obtained in 0.5 mM TMB; using 5 µg SiO2@Au@Pt, at pH 4.0 for 15 min incubation. H2O2 can be detected in the dynamic liner range of 1.0 to 100 mM with the detection limit of 1.0 mM. This study presents a novel method for controlling the properties of bimetallic NPs assembled on a silica template and increases the understanding of the activity and potential applications of highly efficient multifunctional NP-based nanozymes.

PVP-stabilized PtRu nanozymes with peroxidase-like activity and its application for colorimetric and fluorometric glucose detection.

Nanozymes have significant advantages over natural enzymes. The intrinsic peroxidase-like activity of Pt-based nanomaterials can be enhanced by alloying with other transition metals, such as Ru, that have great catalytic activity. In this study, we used polyvinylpyrrolidone (PVP) to synthesize well-dispersed and homogeneous nanostructures. PVP-stabilized Pt-Ru nanozymes (PVP/PtRu NZs) were synthesized and characterized. The PVP/PtRu NZs had an average size of 3.54 ±â€¯0.84 nm and exhibited an intense peroxidase-like activity. The PVP/PtRu NZs were used as peroxidase mimics for colorimetric and fluorometric glucose determination by the glucose oxidase and PVP/PtRu NZs cascade reaction. In the colorimetric assay, the linearly detectable range was 0.25-3.0 mM, with an R2 and limit of detection (LOD) of 0.988 and 138 µM, respectively. In the fluorometric assay, a linear relationship was found when the glucose concentration was between 5.0 and 300 µM (R2 = 0.997), with an LOD of 1.11 µM. Compared to the colorimetric assay, the fluorometric assay had greater sensitivity and a lower detection limit for the determination of glucose. Moreover, the PVP/PtRu NZs had high storage stability over a month and great recovery values in human serum and artificial urine, with a range of 94-106 %. From these results, PVP/PtRu NZs are expected to be used as promising peroxidase mimics in various fields such as biosensing, pharmaceutical processing, and the food industry.

Electrochemical Immunoassay for Determination of Glycated Albumin using Nanozymes.

We developed a new nanozyme-based electrochemical immunoassay method for the monitoring of glycated albumin (GA) known to reflect short-term glycaemic levels. For this study, we synthesized urchin-like Pt nanozymes (uPtNZs) and applied them to colorimetric and electrochemical assays for sensitive determination of GA in total human serum albumin (tHSA) using 3,3',5,5'-tetramethylbenzidine (TMB) and thionine as substrates, respectively. The uPtNZs showed peroxidase-mimic activity in the presence of hydrogen peroxide. Boronic acid (BA)-agarose bead was used to capture GA through specific cis-diol interactions. uPtNZs were modified with GA antibody (GA-Ab) to form sandwich complexes with GA/BA-agarose bead. The amount of Ab-uPtNZ/GA/BA-agarose bead complex increased with increasing percentage of GA in 50 mg/mL tHSA. The colorimetric assay exhibited linearity from 0.02 to 10% (10 µg/mL - 5 mg/mL) GA with an LOD of 0.02% (9.2 µg/mL). For electrochemical assay, GA was detected from 0.01 to 20% (5 µg/mL - 10 mg/mL) with an LOD of 0.008% (3.8 µg/mL). The recovery values of measured GA in human plasma samples were from 106 to 107%. These results indicate that electrochemical assay using uPtNZs is a promising method for determining GA.

Determination of glycated albumin using boronic acid-derived agarose beads on paper-based devices.

Self-monitoring of glycated albumin (GA), a useful glycemic marker, is an established method for preventing diabetes complications. Here, the paper-based lateral flow assay devices were developed for the sensitive detection of GA and the total human serum albumin (tHSA) in self-monitoring diabetes patients. Boronic acid-derived agarose beads were packed into a hole on a lateral flow channel. These well-coordinated agarose beads were used to capture GA through specific cis-diol interactions and to enhance the colorimetric signals by concentrating the target molecules. The devices exhibited large dynamic ranges (from 10 µg/ml to 10 mg/ml for GA and from 10 mg/ml to 50 mg/ml for tHSA) and low detection limits (7.1 µg/ml for GA and 4.7 mg/ml for tHSA), which cover the range of GA concentration in healthy plasma, which is 0.21-1.65 mg/ml (0.6%-3%). In determining the unknown GA concentrations in two commercial human plasma samples, the relative percentage difference between the values found by a standard ELISA kit and those found by our developed devices was 2.62% and 8.80%, which are within an acceptable range. The measurements of GA and tHSA were completed within 20 min for the total sample-to-answer diagnosis, fulfilling the demand for rapid analysis. Furthermore, the recovery values ranged from 99.4% to 110% in device accuracy tests. These results indicate that the developed paper-based device with boronic acid-derived agarose beads is a promising platform for GA and tHSA detection as applied to self-monitoring systems.

Electrochemical Detection of Hydroxylamine via Au-Pt Alloy Nanoparticle-modified Single-walled Carbon Nanotube Electrodes.

In the present study, we developed an electrochemical sensor for highly sensitive detection of hydroxylamine using Au-Pt alloy nanoparticles. Au-Pt alloy nanoparticles were electrochemically deposited on a working electrode made of single-walled carbon nanotubes. The framework composition in the Au-Pt alloy nanoparticle was easily controlled by adjusting the Au3+:Pt4+ composition ratio in the precursor solution. Morphological and chemical characterizations of the resulting Au-Pt alloy nanoparticles were performed using field emission scanning electron microscopy, X-ray diffraction, and energy dispersion X-ray spectroscopy. When the Au3+:Pt4+ ratio in the precursor solution was 1:5, the ratio of Au:Pt atom in alloy nanoparticle was about 6:4. Au60Pt40 alloy nanoparticles were found to have the optimum synthetic ratio for hydroxylamine detection. The electrocatalytic performance of Au-Pt alloy nanoparticles in the presence of hydroxylamine was also characterized using cyclic voltammetry, differential pulse voltammetry, and chronoamperometry. In the chronoamperometric detection of hydroxylamine, the sensor exhibited a detection limit of 0.80 µM (S/N = 3) and a high sensitivity of 184 µA mM-1 cm-2. Moreover, the amperometric response of the sensor in 1 mM hydroxylamine was stable for a long time (450 s). Long-term stability tests showed that the current responses to hydroxylamine were 96, 91 and 85% of the initial signal value after storage for 5, 10, and 20 days, respectively.

Electrochemical Fabrication of Nanostructures on Porous Silicon for Biochemical Sensing Platforms.

We present a method for the electrochemical patterning of gold nanoparticles (AuNPs) or silver nanoparticles (AgNPs) on porous silicon, and explore their applications in: (1) the quantitative analysis of hydroxylamine as a chemical sensing electrode and (2) as a highly sensitive surface-enhanced Raman spectroscopy (SERS) substrate for Rhodamine 6G. For hydroxylamine detection, AuNPs-porous silicon can enhance the electrochemical oxidation of hydroxylamine. The current changed linearly for concentrations ranging from 100 µM to 1.32 mM (R(2) = 0.995), and the detection limit was determined to be as low as 55 µM. When used as SERS substrates, these materials also showed that nanoparticles decorated on porous silicon substrates have more SERS hot spots than those decorated on crystalline silicon substrates, resulting in a larger SERS signal. Moreover, AgNPs-porous silicon provided five-times higher signal compared to AuNPs-porous silicon. From these results, we expect that nanoparticles decorated on porous silicon substrates can be used in various types of biochemical sensing platforms.

Large-scale plasma patterning of transparent graphene electrode on flexible substrates.

Graphene, a two-dimensional carbon material, has attracted significant interest for applications in flexible electronics as an alternative transparent electrode to indium tin oxide. However, it still remains a challenge to develop a simple, reproducible, and controllable fabrication technique for producing homogeneous large-scale graphene films and creating uniform patterns with desired shapes at defined positions. Here, we present a simple route to scalable fabrication of flexible transparent graphene electrodes using an oxygen plasma etching technique in a capacitively coupled plasma (CCP) system. Ascorbic acid-assisted chemical reduction enables the large-scale production of graphene with solution-based processability. Oxygen plasma in the CCP system facilitates the reproducible patterning of graphene electrodes, which allows controllable feature sizes and shapes on flexible plastic substrates. The resulting graphene electrode exhibits a high conductivity of 80 S cm(-1) and a transparency of 76% and retains excellent flexibility upon hard bending at an angle of ±175° and after repeated bending cycles. A simple LED circuit integrated on the patterned graphene film demonstrates the feasibility of graphene electrodes for use in flexible transparent electrodes.